Big E Loudspeakers

A Forum to discuss Big E Loudspeakers and the MVW technology


    Finalized MA112/ Mas112 models, options, and pricing

    Share
    avatar
    mikearnopol
    Manufacturer
    Manufacturer

    Posts : 177
    Join date : 2013-03-01

    Finalized MA112/ Mas112 models, options, and pricing

    Post by mikearnopol on Fri Jul 11, 2014 12:03 pm

    Ok--all settled.

    MA112 will be with Eminence Kappalite 4 or 8 ohm speaker. Four Faital 3's.
    Two switches for mids. One takes out a big peak at about 1700hz. The other takes out a wide mid bump from about 600hz to 2400hz. Or not. The wide bump is pretty musical. The 1700hz peak gives a strong midrange bite.
    $875
    options---wheels and top handle $60

    Ok---I have to be honest and ethical here. Duke and I worked a lot to refine the MAS112 crossover (for the 18sound). The 18sound is so good that the crossover didn't need the complexity we had anticipated. Duke did work very hard to get the perfect integration of the woof and mids/highs.The sound is killin' .It will have one mid switch.(for a small mid boost) This removes a small pad from the mids. It is intended to be used when one MAS112 is used. It has a small impedance dip that is fine as long as it's one cab. For two cabs together leave the pad in. You'll get more mids anyway with two cabs. The voicing with the pad engaged is a gentle plateau from about 700 hz up (about 2 db). Without the pad you get another couple of dbs. It uses four Faital 4's (you get an honest 14khz out of the 4's)
    So---the MAS112 will be a bit cheaper than originally planned.

    MAS112  $990
    options
    wheels and center handle  $60

    Mo Mids Mod $100
    This adds two more Faital 4"'s and about another 2db of mids from 700hz up

    Ciare tweeter with defeat switch   $120 (the Ciare can't be used with the MO Mids Mod)

    Make sense?
    avatar
    Badong

    Posts : 11
    Join date : 2013-09-03

    Re: Finalized MA112/ Mas112 models, options, and pricing

    Post by Badong on Sat Jul 12, 2014 7:26 am

    What is the impedance of the MAS112 and the weight for both?
    avatar
    Steve Regier
    Inventor
    Inventor

    Posts : 749
    Join date : 2013-02-07
    Location : Planet Tesla just outside the time stream

    Re: Finalized MA112/ Mas112 models, options, and pricing

    Post by Steve Regier on Sat Jul 12, 2014 1:50 pm

    The MAS-112 is an 8 Ohm loudspeaker. The MA-112 and the MAS-112 are in the 50 pound neighborhood.


    _________________
    Co-Inventor of the Manipulated Vortex Waveguide
    "So let it be written. So let it be done."
    [You must be registered and logged in to see this image.]

    Sponsored content

    Re: Finalized MA112/ Mas112 models, options, and pricing

    Post by Sponsored content


      Current date/time is Fri Aug 18, 2017 5:54 pm